Ningbo Souwest
Magnetech Development Co.,Ltd.

Positions: Products→Magnetic Separator→Plate Magnets

General Description

SWMAG Plate magnets are widely used for removing Tramp Iron such as Bolts, Nuts, Bits of Wire, Nail and other casual contamination from free flowing materials, like corn, sugar, flour, gravel, plastic and other granular materials. As the material pass over or under the magnet plate, tramp metal is pulled to the magnet's working surface and held in place until removed.

Plate magnet can be designed in a wide of models, configurations and sizes to meet with specific operations and plant conditions. They are usually carried in angled chutes, ducts, spouts or suspended above conveyors, screens and feed trays to protect against occasional damage to the plant caused by bits.
1. Flush Face (FF)
Flush Face Plate Magnets deliver optimum tramp metal separation performance when used in above-the flow chute or belt applications. When installed over the material flow, the powered Flush Face plate magnets deliver continuous magnetic protection for down atream processing equipment by lifting ferrous tramp out of the product flow stream.

Specification:

Part No	B	T	D	SuspensionDistance
SWFMP-FF60	250	51	175	60
SWFMP-FF120	300	76	225	120
SWFMP-FF150	450	111	360	150
SWFMP-FF160	190	36	125	60
SWFMP-FF120	250	46	175	120
SWFMP-FF150	330	56	240	150

 


2. Exposed Pole (EP)
Exposed Pole (EP) Plate Magnets are engineered to deliver high performance tramp metal separation in low volume applications. These applications are for below-the-flow installations where the product flows over the magnet face.

Specification:

Part No	B	T	D	SuspensionDistance
SWFMP-FF60	250	51	175	60
SWFMP-FF120	300	76	225	120
SWFMP-FF150	450	111	360	150
SWFMP-FF160	190	36	125	60
SWFMP-FF120	250	46	175	120
SWFMP-FF150	330	56	240	150

3. Spout Magnet(SM)
Diverter Spouts provide maximum ferrous tramp metal separation in high volume chute applications where wash-off can be a problem.

Specification:

Part No	B	T	D	SuspensionDistance
SWFMP-FF60	250	51	175	60
SWFMP-FF120	300	76	225	120
SWFMP-FF150	450	111	360	150
SWFMP-FF160	190	36	125	60
SWFMP-FF120	250	46	175	120
SWFMP-FF150	330	56	240	150

4. Suspended Plate Magnet
Suspended Magnets are designed for high separation performance in over-the-belt conveyor applications. These heavy duty permanent magnets incorpotating all welded construction are particularly effective in removing tramp metal in high volume applications.
Supplied with tapped mounting holes in the backing plate and four eye bolts, these suspended magnets can be rigidly mounted with threaded bolts or hung by eye bolts using cable or chain systems.

Specification:

Part No	H	A	B	SuspensionDistance
SWMP-SPM18	180	400	400	120
		500	500
SWMP- SPM25	250	600	600	120
		700	700
SWMP- SPM35	350	800	800	150
		900	900
SWMP- SPM40	400	1000	1000	160
		1100	1100
		1200	1200

 

 


Note:

"B"= Overall Length, "D"= Overall Width, "T" and "H"= Overall Thickness Suspension distance measurements are the maximum recommended. All dimensions approximate.

Down load: Plate Magnets, Plate Magnets Manufacturer, Supplier, Factory, Exporter in china

1 

Plate Magnets Related Keywords: Magnetic plate , Magnetic l plates , Mgnetic plates , Magnetic sine plate , Magnetic kick plate ,
Other related category: Bullet Magnet,Permanent Magnetic Separator,Hump Magnets,Magnetic Bar,Magnetic Drawer,Magnetic Grate,Magnetic Liquid Traps,